Strong Adhesion
Bonds well to a range of metal and masonry substrates.

HIGH SOLIDS FORMULA
EASY APPLICATION
FAST DRYING
MAXIMUM ADHESION
TILES & SHINGLES
MOLD/FUNGUS/LICHEN RESISTANT
NXT Metal Primer is an acrylic rust protection primer specially formulated for a wide range of metal roofing and metal surfaces, both new and weathered - steel, galvanized, zincalume, aluminum, lead, coppper & pre-coated metal sheeting.
It delivers excellent adhesion, good chemical resistance and weatherability to help protect metal from corrosion and extend the life of your roof.
Ideal for both new metal installations and the restoration of weathered or aged metal surfaces. Use beneath NXT water-based top coats for a complete, long -lasting system.
NXT Metal Primer can be used on:
Helps protect metal roofs against corrosion.
Bonds well to a range of metal and masonry substrates.
Apply by brush, roller or airless spray.
Performs well in hot, cold and wet conditions when properly top-coated.
Ideal under NXT water-based top coats.
Coverage Rate
0.6 gal. per 100 sq. ft.
Application
Apply one coat at approximately 200 sq. ft. per gallon
SURFACE PREPARATION
Clean surface thoroughly with high-pressure cleaner over 250 PSI.
NOTES
APPEARANCE
Viscous Liquid
TOTAL SOLIDS
35%
% VOLATILES
Nil (wet film)
PH
9.0
SPECIFIC GRAVITY
1.26
SOLUBILITY IN WATER
Soluble
MINIMUM FILM FORMING TEMPERATURE
50°F
MINIMUM FILM THICKNESS (DRY COAT)
4 mil
Not recommended over high gloss coatings on metal sheet roofing.
Allow adequate curing before top-coating on non-porous substrates.
For exterior use only with adequate ventilation.
Talk with our team about your needs today. We’ll help you get exactly what you need, quickly & easily.